All of the snow plows we offer for the 2000 Jeep Grand Cherokee are designed to mount with custom mounting brackets rather than a front mount hitch.
One great snow plow option for your Grand Cherokee is the SnowBear Winter Wolf Snowplow # SB324-166 with the Custom Mounting Bracket Kit # SB397-041. This SnowBear plow is a great option because the custom brackets for this snow plow will install on your Grand Cherokee without any drilling, though the removal or trimming of the brush guard... view full answer...
We have a few options for snow plow extension springs. For 14-1/2" long, use Replacement Trip Spring for Boss Snow Plow - 14-1/2" Long # 3371304715. For 17-7/8" long use Replacement Trip Spring for Boss Snow Plow - 17-7/8" Long x 2-1/4" Diameter # 3371304716.
I have attached demonstration videos for these springs along with a link to all of the snow plow springs available on our site. If none of these springs are what you are looking for, then feel free to provide us with more information... view full answer...
I checked with SnowBear and the correct bracket kit for a 2013 Jeep Wrangler Unlimited Rubicon with 4-wheel drive and the standard factory bumper is the Custom Mounting Bracket Kit # SB397-101.
This kit is designed to fit SnowBear Hydraulic or Winter Wolf snow plows though if you let me know the model number of your plow I can check with SnowBear for compatibility. view full answer...
Most snow plows do include a kick stand like # 3371304710 for easier support when moving or storing the unit, however not every model includes this component. In this case simple jack stands would be used in its place for stability when it's off the truck.
Now as for the shoes on your snow plow, these are attached to the bottom of the blade and will essentially raise the blade up just a bit to keep it from pushing gravel or dirt along with the snow you're trying to clear. Whether or not... view full answer...
Yes, you can absolutely mount a snow plow like the SnowBear Personal Snowplow for 2" Hitches # SB324-080 you referenced on the Draw-Tite front-mounted hitch you asked about:
- Draw-Tite Front Mount Trailer Hitch Receiver # 65080
This hitch, which fits 2007 and up Toyota Tundras and Sequoias, meets the necessary standards and has a 500 lb vertical load limit (which is like tongue weight for a front-mount hitch), and the SnowBear weighs 315 lbs, so it has more than the necessary capacity. view full answer...
Both the Curt # 31408 and Draw-Tite # 65048 mount to the top of the bumper as you referenced. I believe you are correct that the hitch mounted snow plow won't work with these, because both SnowBear and Detail K2 snow plows we carry all use custom brackets versus a front hitch for your vehicle.
I've linked the page to the snow plows compatible with your vehicle and all the SnowBear plows use the Custom Mounting Bracket Kit for SnowBear Hydraulic and Winter Wolf Snowplows # SB397-024. view full answer...
The Replacement Back Drag for Western and Fisher XV V-Plow Snow Plows # 3371311215 bolts onto the holes in front of the cutting edge of your Fisher XV Snow Plows. Since it is a replacement blade, it is meant to fit on that specific kind of snow plow in front of its specific kind of cutting edge. That way you can take full advantage of its 70 degree angle for better scraping and back dragging.
This also comes in different sizes depending on your snow plow:
- Replacement Back Drag for Western/Fisher... view full answer...
Choosing a snow plow can be a bit intimidating because of all the choices available on the market. The snow plow I recommend for your 1997 Nissan Pathfinder is the Detail K2 with a custom mount:
Detail K2 Rampage II Elite Snowplow - # K2RAMP8219ELT
Custom Mount - # K286615
This is an 82" x 19" snow plow and it uses an electric actuator with a wireless remote so you're able to control the operation from inside your cab. The differences between snow plows basically just has to do with size... view full answer...
You can turn the plow to an angle to either side so snow will move to one side or the other and not over the top. The Agri-Cover plows are built to be small, light-weight, easy to use plows. They do not use hydraulics and are shorter so they do not require their own set of head lights and can be used by lighter trucks and SUVs when compared with the larger, commercial plows used by snow removal companies.
I called Agri-Cover and you can remove one of the boxed ends to allow snow to escape... view full answer...
It looks like the old SnowBear mounting kits weren't made for Chevy Colorado pickups so for your 2020 model you'll either need to have a shop fabricate something for you or you'll need to install the Front 2" Hitch Receiver # C31074 and use a hitch-mounted plow like the 84" Wide x 22" Tall SnowBear Plow # SB324-081 which comes with an electric winch. view full answer...
We do have snow plow setups for your 2003 Ford Ranger like with the SnowBear Personal Plow # SB324-080 which installs in a front hitch like the Curt # C31063 which is a confirmed fit for your truck. view full answer...
I did some research and I got the following information. You will have to be careful plowing wet and heavy snow with the Detail K2 Snowplow for 2" Hitches - 82" Wide x 19" Tall, part # K2AVAL8219. According to K2, "Your K2 snowplow is not intended to clear the snow deposits created by large municipal or commercial snowplows, which contain heavy compacted, frozen lumps of snow and ice, and could damage the plow and vehicle. view full answer...
Trailer hitch and snow plow manufacturers do not test their products on vehicles that have been modified with aftermarket parts. Therefore, I would not be able to confirm fitment of a front mount trailer hitch or snow plow on your 2007 Jeep Wrangler. Your best option in order to attach a snow plow to the vehicle would involve putting the stock Jeep bumper back on. There is a very small likelihood that the snow plow would clear the front bumper assuming that the hitch fits.
If you install... view full answer...
To use a SnowBear plow with your 2021 GMC Sierra 1500 you'll need to install a front mount hitch like part # C31088 (does not fit a 2.7L Turbo) and then use one of their hitch-mount snow plows like the Personal Snowplow # SB324-080 which is 82" wide x 19" tall and comes with an electric winch to raise and lower the hitch.
The last time SnowBear made a custom mount for their WinterWolf snow plows for a GM truck application was for the 2018 model year which is why you'll have to switch everything... view full answer...
Yes, you can remove snow on a brick drive with the Replacement Cutting Edge for Western Snow Plows # 3371301290.
This is a replacement for a Western snow plow and is the same as Western part number 49312. view full answer...
The fitment of a snow plow mounting kit will vary by manufacturer therefore I would need to know exactly what snow plow mounting kit you are using in order to confirm fitment. However, if you are using a SnowBear snow plow then I can confirm the Custom Mounting Bracket Kit for SnowBear Hydraulic and Winter Wolf Snowplows part # SB397-013 is correct or if you are using a Detail K2 snowplow then I can confirm that the Custom Mounting Brackets for Detail K2 Snowplows part # K284311 is correct... view full answer...
It depends on where the Boss Snow Plow is attached to the frame on your 2015 Ford F-350 super duty. Most snow plows and front mount hitches like part # 65049 have identical mounting locations so they are not compatible at the same time. However, I have attached a snip from the installation instructions for your reference. If you look at the attached video if your snow plow shares mounting locations of the hitch, they will not fit together on the truck. I do not know of anyone that has done... view full answer...
Since you have a SnowBear plow that uses the 5XM5 Universal Cross Member # SB324-060 you just need the Custom Mounting Bracket Kit # SB397-051 for your 2005 Chevy Colorado. This provides you with the 2-point brackets needed to mount your SnowBear snow plow. view full answer...
The Curt Front Mount Trailer Hitch Receiver part # C31071 is an excellent option for a 2017 Chevrolet Silverado 3500 and will work perfectly with the SnowSport Snow Plows. The Curt hitch is actually the preferred option for snow plows due to the receiver tube height so this setup will work perfectly for you. view full answer...
For your 2014 Ram 2500 you are on the right track for using a plow by having the Curt Hitch # C31015 installed. The SnowBear Personal Snowplow # SB324-081 would be a great option as well. It has a wireless remote and in-cab switch setup to make operation easy.
The taller the plow the better it would do in deeper snowfalls. Typically we recommend shorter plows for the lighter duty vehicles just for visibility's sake. You drive a taller vehicle so I would go with the taller plows like the... view full answer...
Go To Results